|
iMachining 2.0.16 x64 for NX 1953
iMachining for NX is the name of a software engineer specializing in CNC machining. Powerful high performance product you will need for CNC machining. The software in front of you as a standalone software is capable of making you successful. The technology used in this software is such that you can increase the percentage of excellence and success of your work. The creators of the software also believe it is a revolutionary product in the CNC industry.
Of course, the makers of iMachining for NX have been able to fulfill most of their promises with this product. When you use this software you will save a lot of time. Enjoying this software with advanced operating solutions and engineering is another factor in the success of this product. The simulations performed by this software will be in two-dimensional and three-dimensional modes. With unique simulations of this software you will get a very good analysis and analysis of your CNC machining.
Pre-installed Siemens NX 12.0 – 2206 Series Win64
Operating Systems
Windows 10
Windows 8 / 8.1
Windows 7
Recommended Hardware
Processor: Intel® Xeon ™, Intel® Core ™, Intel® Core ™ 2 Duo, Intel® Core ™ 2 Quad or higher (If you use other processors we assume no responsibility and no support)
Memory: 4 GB RAM (for large components processing, we recommend 8 GB RAM (or more)
Disk space: 15 GB free disk space for installation
Video: 1,280 x 1,024 or higher screen resolution
Read the Readme.txt file in the Crack folder.
Download Part 1 – 1 GB
Download Part 2 – 499 MB
Download Part 1 – 1 GB
Download Part 2 – 386 MB
Download iMachining 2.0.16 for NX 1953 x64
Download iMachining 2.0.16 for NX 1926 x64
Download iMachining 2.0.16 for NX 18XX x64
Download iMachining 2.0.12 for NX 8.5-12.0 x64
1.49 GB
-------------------------------------------------------------
iMachining 2.0.16 x64 for NX 1953
下载链接如下：
| 
发表于 2023-6-11 15:20:49
