|
WinSim DESIGN II version 15.05b | 136.3 mb WinSim, Inc., develops and markets engineering software, has released 15.05 version of DESIGN II, is steady-state and dynamic process simulator. Rigorous Process Simulation for Chemical and Hydrocarbon Processes including Refining, Refrigeration, Petrochemical, Gas Processing, Gas Treating, Pipelines, Fuel Cells, Ammonia, Methanol, Sulfur and Hydrogen Facilities - Chemical Process Simulation (Process Modeling)
- Hydrocarbon Process Simulation (Process Modeling)
- 60+ Thermodynamic Methods / 1,200+ Component Database
- Crude, Mixed Amine and Multi-Component Distillation Towers
- Flash Vessel Sizing / 2 phase heat Exchanger Rating
- Three Phase Thermodynamic Calculations (vapor, hydrocarbon liquid and aqueous liquid)
- Crude Feed Specifications (ASTM D-86/1160, TBP)
- ChemTran Data Regression and Property Constants
- Automatic Output to Microsoft Excel
- Visual Basic / Visual C++ interface
- Inline Fortran / Process Optimization / Case Study This is a release with both fixes and upgrades:
- Added more error detection and handling to increase stability
- Fixed displaying all the time intervals in a Table on the flowsheet
- Fixed a problem where the child text strings did not retain their relative locations to their streams and symbols when pasting from the clipboard
- Fixed a problem with the text moving to the center of the flowsheet when pasting symbols and streams to a sheet that is the same size as the clipboard selection
- Fixed a problem in the Controller unit module that did not allow stream mass flowrates to be used for the measured variable when varying a Component Splitter
- Fixed using the Controller unit module to set the mass flowrate of a feed stream to a percentage of the mass flowrate of another stream
- Miscellaneous small enhancements and fixes About WinSim Inc. WinSim, Inc. develops and markets engineering software. It offers DESIGN II for Windows, a steady-state process simulator for chemical and hydrocarbon processes, including refining, refrigeration, petrochemical, gas processing, gas treating, pipelines, fuel cells, ammonia, methanol, sulfur, and hydrogen facilities. The company’s product is used in various applications, such as physical properties, pipeline modeling, expander and lean oil plants, glycol units, amine units, gathering and transmission, rigorous refinery columns, heat exchanger and separator sizing and rating, and data regressions. WinSim, Inc. was formerly known as ChemShare Corporation and changed its name to WinSim, Inc. in 1995. WinSim, Inc. was founded in 1969 and is based in Sugar Land, Texas. Product: WinSim DESIGN II
Version: 15.05b
Supported Architectures: 32bit / 64bit
Website Home Page : http://www.winsim.com
Language: english
System Requirements: PC
Supported Operating Systems: Windows XP / Vista / 7even / 8.x / 10
Size: 136.3 mb
| 
发表于 2019-1-21 21:04:53
